Tank monitor alarm won't stop beeping
You can stop the beeper. The alarm stays until it's fixed.
Write down the alarm first: it says what's wrong.
Then look it up in the alarm codes.
Need a tech for this?
Request a techCheck this first
- TLS-350: press the red ALARM/TEST key.
- TLS4 or TLS-450PLUS: touch the alarm bar, then again.
- No screen? Press the red ALARM RESET button.
- Red Jacket IQ box: press Reset/Cal until one green flash.
- Franklin Smart Controller: a short press of reset.
When to call a tech
- It's a leak alarm, like Sudden Loss or Fuel Alarm.
- It comes back right after you silence it.
- You see or smell fuel.
Good to know
- The alarm lights stay on until the cause is fixed.
- Silencing doesn't fix the cause.
- Holding the IQ box's Reset/Cal 10 seconds recalibrates it.
Who can fix it
- A tech certified on Veeder-Root consoles.
Need a tech?
One request. Up to 4 licensed techs call.
Request a techRelated
Sources: Veeder-Root 577014-243, Rev C (2026), p. 1, Veeder-Root D051-330, Rev M (2023), pp. 15, 16, Franklin Fueling Systems 223987101, r6 (2018), p. 9, Veeder-Root: warnings and alarms, Veeder-Root: certified technician training.